MSI Keeper 945GME V2.1 User Manual
Page 48
3-10
M S-9641 M ainboard
**VGA Setting**
The following items allow you to configure the VGA settings of the system.
PEG/Onchip VGA Control
This setting allows you to select whether to use the onchip graphics processor
or the PCI Express card.
W hen set to [Onchip VGA], the motherboard boots up using the onboard graph-
ics processor, even when a PCI Express graphics card is installed.
When set to [PEG Port], the motherboard boots up using the PCI Express graph-
ics card, if one is installed. Otherwise, it defaults to the onboard graphics
processor.
W hen set to [Auto], the BIOS checks to see if a PCI Express graphics card is
installed. If it detects that a PCI Express graphics card is present, the motherboard
boots up using that card. Otherwise, it defaults to the onboard graphics
processor.
On-Chip Frame Buffer Size
The field specifies the size of system memory allocated for video memory.
Boot Display
Use the field to select the type of device you want to use as the display(s) of
the system.
TV Format
Select the TV format if you have connected a TV to the system.
PDF created with pdfFactory Pro trial versi