MSI Keeper 945GME V2.1 User Manual
Page 51
3-13
BIOS Setup
Onboard Device
Power On LAN ByPass, Power Off LAN ByPass
LAN Bypass feature removes a single point of failure so that essential
business communication can continue while a network failure is diagnosed
and resolved. In the event of a power, hardware or software failure, Hard-
ware Bypass will automatically activate, allowing network traffic to continue.
Traffic between the LAN and W AN is allowed without interruption.
Power on LAN Bypass selects the [LPC] or [GPIO] bypass mode for power
on. Power off LAN Bypass selects the [LPC] bypass mode for power off.
Planar Ethernet #01/ #02/ #03/ #04/ #05/ #06
These settings disable/enable the onboard Ethernet controller.
PXE Boot
The Preboot Execution Environment (PXE) is an environment to boot comput-
ers using a network interface card independently of available data storage
devices (like hard disks) or installed operating systems.
USB Controller, USB 2.0 Controller
This setting is used to enable/disable the onboard USB / USB2.0 controller.
USB Keyboard/M ouse Support
Set to [Enabled] if your need to use a USB-interfaced keyboard/mouse in the
operating system that does not support or have any USB driver installed,
such as DOS and SCO Unix.
PDF created with pdfFactory Pro trial versi