Nostalgia Electrics MDF200 - Manual (Page 6)

E
N
G
LI
S
H
4
10. Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn all control knobs to OFF, then remove plug from wall outlet.
11. DO NOT operate any appliance with a damaged cord or plug, nor if
the appliance has been damaged in any manner. Return the appliance
to the nearest repair shop for examination or repair.
12. The manufacturer does not recommend the use of accessory
attachments. Use of accessory attachments may cause injuries.
13. DO NOT use outdoors.
14. Position the appliance as close to the outlet as possible
to prevent injury due to tripping over cord.
15. DO NOT place on or near a hot gas or electric burner, nor in a heated oven.
16. DO NOT move the appliance when in use.
17. Boiling oil can cause SEVERE burns. During use, the appliance is very hot and
remains hot for some time after being turned off. DO NOT touch hot surfaces like
the Oil Fill Pan.
18. Hot oil can splash and cause SEVERE burns. Keep face and hands away from the
open window at top of AUTOMATIC MINI DONUT FACTORY™.
19. Keep hands and utensils out of the unit while operating to reduce the risk
of severe injury or damage to the AUTOMATIC MINI DONUT FACTORY™. A
spoon or tongs may be used to manually flip or remove a trapped donut
out of the oil, but only when the donut maker is not running.
20. DO NOT use the appliance for other than its intended use.
21. An appliance that is plugged into an outlet should not be left unattended while in operation.
22. Check inside of Oil Fill Pan and Conveyor Belt for presence of foreign objects prior to use.
23. Make sure that the Donut Slide, Donut Bin, Drainage Tray and Oil Bin
Drainage Pan are attached and in place before turning on the unit.
24. A short power supply cord is provided to reduce the risk resulting
from becoming entangled or tripping over a long cord.
25. Longer detachable power supply cords can be used if care is exercised in their use.
26. The marked electrical rating of an extension cord should be at
least as great as the electrical rating of the appliance.
27. This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electrical shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
28. Unplug the AUTOMATIC MINI DONUT FACTORY™ from electrical outlet when
not in use and before cleaning. Remove plug by gripping the plug body and
pulling out of the outlet. Never yank or twist cord to unplug the unit.
29. Do not attempt to service this appliance yourself, as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
SAVE THESE INSTRUCTIONS!