Revolabs HD Single & Dual Channel System — Polycom VTX 1000 - Manual

Revolabs HD Single / Dual Channel System — Polycom VTX 1000 Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs HD Single or Dual Channel System to a Polycom VTX 1000 Speakerphone.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Revolabs Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs HD Single or Dual Channel System
2. Polycom VTX 1000 Speakerphone
3. QTY 1 3.5mm unbalanced male connector to RCA male connector cable*
* 07-35MUTORCA-01 6’ 3.5mm unbalanced male connector to RCA male
connector cable available from Revolabs