Revolabs HD Single & Dual Channel System — Polycom QDX 6000 - Manual

Revolabs HD Single / Dual Channel System — Polycom QDX 6000 Setup
This setup guide will guide you through the steps needed to properly connect a
Revolabs HD Single or Dual Channel System to a Polycom QDX 6000 video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Revolabs Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding. Con-
tact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs HD Single or Dual Channel System
2. Polycom QDX 6000 Video Conferencing System
3. QTY 1 3.5mm unbalanced male connector to dual RCA male connector ca-
ble*
* 07-35MUTODRCA-01 6’ 3.5mm unbalanced male connector to dual RCA male
connector cable available from Revolabs