Revolabs Fusion Microphone System — Polycom FX User Manual
Revolabs Equipment
Revolabs Fusion
TM
Microphone System — Polycom FX Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Fusion Microphone System to a Polycom FX video codec.
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding. Con-
tact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Fusion 4 or 8 channel Microphone System
2. Polycom FX Video Conferencing System
3. QTY 2 RCA male — RCA male cable
4. Amplified Speakers
NOTE: These instructions may also be used for older Polycom video codecs
such as the ViewStation MP, ViewStation 128, ViewStation 512, VS 4000
etc.
NOTE:
IMAGES
OF
SET
UP
SCREENS
ARE
DEFAULT
SETTINGS
FROM
P
OLYCOM
AND
ARE
PART
OF
THE
P
OLYCOM
V
IEW
S
TATION
U
SER
G
UIDE
© N
OVEMBER
2002