Kodak DC265 - Manual (Page 44)

3-16
Setting your camera for Super quality
There are several important things to remember:
✔
The Super quality setting only appears in the script menu if it resides on
the memory card that is currently in the camera.
✔
You can only set your camera for Super quality through the Scripts menu.
The status LCD quality settings are Good, Better, and Best.
✔
Setting your camera to Super quality significantly reduces the amount of
memory on your card and is recommended for advanced users only.
✔
Once set, the Super quality mode persists for all pictures until changed,
even after the camera is turned off and on.
✔
The status LCD quality setting does not display the Super quality mode.
To determine if you are in the Super quality mode, you must check it
through the Scripts menu.
To set your camera to Super quality:
To exit the Super quality mode:
✔
Select Good, Better, or Best from the status LCD display, or
✔
use the Super Quality Mode script to deselect the Super quality option.
1 With the Mode dial set to Capture, press
Menu.
2 Press until the Kodak Script menu is
highlighted.
3 Press until a script is highlighted.
4 Select Super Quality Mode.
5 Highlight On and press Select.
A checkmark appears next to the selection
and a confirmation screen indicates the
changed quality level.
☞
If you press Stop Script, the quality
level reverts to the previous setting.
6 Press Exit from the confirmation screen.