Kodak DC265 - Manual (Page 68)

4-18
Viewing pictures on your television
The camera video out feature lets you show the pictures from the memory card
on your television.
☞
The color LCD is disabled when the camera is attached to the
video cable.
1 Turn off your television and camera.
2 Insert the video output cable into the video out
connection on the side of your camera.
3 Connect the other end of the cable to the video in
connection on your television.
☞
To play sound on your television, use a
cable that has two connectors on the
television end. Connect the yellow
connector to the video in connection and
the white connector to the audio in
connection.
4 Turn on the camera and television.
5 Set the Mode dial to Review.
6 Set the television to the correct channel for
viewing video.
The pictures that are stored on the memory card
appear on the television screen.
7 Scroll through your pictures using any of the
three methods described in the “Viewing
pictures” section on page 4-7.
☞
If pictures do not appear on the television,
you may need try a different channel or
adjust the Video preference on the camera.
Refer to page 4-5.