Kodak ESP 3 - Manual (Page 14)

Chapter 1
Quantity Display
Light Status Cause Action/Solution
1 - 9 Indicates the number of copies to
be made. Press Quantity to select the number of
copies you want to make.
Flashing C Indicates that printhead calibration
must be started. As needed, load the paper tray with
plain paper (Letter-size or A4). Press
the Copy button.
Flashing E The printhead is not installed or not
installed correctly. Remove any ink cartridges that may be
installed. Remove the printhead and
then re-install the printhead. Re-install
the ink cartridges and close the lid. A
new calibration sheet will print.
AiO Home Center (Windows)
The AiO Home Center software is an application that runs on the computer. It enables you to print,
copy, scan, and configure your All-in-One printer from the computer.
The six large icons on the AiO Home Center main window let you:
•
Scan Pictures and Documents
•
Copy Pictures
•
Enhance and Print Pictures
•
Configure Settings for Printing, Copying, and Scanning.
•
Access My Resource Center at Kodak
•
Order Supplies
There are three small icons in the upper right corner of the window:
Returns you to the main Home Center screen
Displays the Status Monitor
Displays a Help panel for the Home Center software
8 Kodak ESP 3 All-in-One