Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 109)

;PASSWD=password
;ENCRYPT=NO
;UNATTENDED=NO
;BASEMAP=<ID.BMA>
;DRIVERMAP=<ID.DMA>
[ImageUltra Repository]
IUSERVER=imageultra
IUSHARE=data
IUREPOS=imageu~1\repos3~1.0
DOMAIN=
USERID=userid1
PASSWD=password
ENCRYPT=NO
UNATTENDED=No
[ImageUltra Repository #2]
IUSERVER=imageu-uk
IUSHARE=data
IUREPOS=imageu~1\repos3~1.0
DOMAIN=
USERID=userid2
PASSWD=password
ENCRYPT=NO
UNATTENDED=No
Controlling the behavior of the service partition
ImageUltra Builder 5.0 supports two types of Service Partitions:
v Back of the hard disk drive
v Front of the hard disk drive
The Service Partition at the back of the hard disk drive is a FAT32 partition with
the volume label SERVICEV001. This partition works with the Windows XP
version of ThinkVantage Rescue and Recovery. The Service Partition at the front of
the hard disk drive is an NTFS partition. The NTFS partition works with the
Windows Vista version of ThinkVantage Rescue and Recovery with the volume
label SERVICEV002 or the Windows 7 version of ThinkVantage Rescue and
Recovery with the volume label SERVICEV003.
When you create your base map, the New Map Wizard prompts you to define
what action to take on the maps and modules after the image has been installed.
You have three options: Delete none, Delete all, and Delete unused. Your selection
affects the size of the service partition, whether or not console-side recovery will be
available, and the amount of time it will take to complete the installation. See
“Defining service-partition behavior” on page 24 for more information about these
settings.
You can change the setting anytime during the map-development process. To
change the setting, do the following:
1.
Open the Base Map window.
2. Highlight the root entry or any menu item in the tree structure.
3. In the Main window menu bar, click Tools and then click Settings.... The Map
Settings window opens.
4. Click the Image Cleanup tab.
5. Click the Delete none, Delete unused, or Delete all radio button to select the
action you want to take.
6. Click OK.
7. Click the Save icon located in the Main window toolbar.
Chapter 6. Map construction overview 95