Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 57)

Table 4. Staging-area behavior - Lenovo branded computers (continued)
Conditions on a Lenovo branded target computer prior to deployment
Maps deployed
Service partition
present Description
Result from
deployment
Service partition - Front Yes - Front
v Create new service
partition at the
front of the hard
disk drive.
v Move the
necessary modules
from the existing
service partition to
the new partition.
v Delete the old
service partition.
v Deploy the image.
v Create the service
partition in the front
or at the back,
depending on the
base map.
v Deploy all modules
defined in the base
map to the service
partition.
Note: If a driver map
is not used under these
conditions, setup will
use the native
Windows device
drivers and some
features might not be
enabled or optimized.
Service partition - Front Yes - Back
Service partition - Back Yes - Front
Service partition - Back Yes - Back
Base map only No N/A
v Create the service
partition in the front
or the back,
depending on the
base map.
v Deploy all modules
defined in the base
map to the service
partition.
Note: If a driver map
is not used under these
conditions, setup will
use the native
Windows device
drivers and some
features might not be
enabled or optimized.
Base map only No N/A
v Create the service
partition in the front
or the back,
depending on the
base map.
v Deploy all modules
defined in the base
map to the service
partition.
v Use device-driver
modules from the
HPA and use them
during installation.
Base map only
Chapter 3. Staging-area behavior and logic 43