Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 176)

a. In the Source Directory field, type the complete path to the folder that
contains the source device-driver files.
b. In the Silent Install Command area, leave the Command and Parameters
fields blank.
Note: The following steps apply to the use of mini-applications.
Mini-applications are useful for creating special folders, cleaning up
registry entries, or performing any other service related to the
installation of the device driver. For more information about the use
of mini-applications, see “Adding mini-applications” on page 160.
c. If you have a mini-application contained in this module that needs to run
immediately before the device driver is installed, use the Preinstall
Command area to type the command and parameters associated with
starting that mini-application.
d. If you have a mini-application contained in this module that needs to run
immediately after the device driver is installed, use the Postinstall
Command area to type the command and parameters associated with
starting that mini-application.
14. If you want to assign a filter to the driver module, click the Filters tab and
then do the following:
a.
Click the Insert Filter icon. The Add Filter window opens.
b. In the left pane of the Add Filters window, navigate to the folder that
contains the filter you want to use.
c. In the right pane of the Add Filters window, select the filter you want to
use; then click OK. The Add Filter window closes and the filter is added
to the Filters tab.
d. Double-click the filter you just added. The Edit Parameters window opens.
e. In the Parameters field, type any parameters required to get the desired
result. For information about the parameters associated with the filters
provided with the ImageUltra Builder program, see the ImageUltra Builder
help system.
f. Click OK.
g. If you assign multiple filters to a module, do one of the following:
v If all filters must be satisfied to install the module, click the All of these
must be true
radio button.
v If any of the filters can be satisfied to install the application, click the
One of these must be true
radio button.
15. In the Options tab field, do the following:
a.
The “Path to copy installable files” field defines whether or not you also
want to copy the device-driver installable files to the target partition (C: or
service partition). If the target partition is the C: partition, the following
apply:
v If you type a path in this field and check the INF Installable check box
on this tab, an extra copy of the installable files will be copied to the C
partition in the specified folder and the device drivers will be made
available to the Windows setup or mini-setup program.
v If you type a path in this field and do not check the INF Installable
check box on this tab, the installable files will be copied to the C
partition in the specified folder, but the device driver will not be made
available to the Windows setup or mini-setup program unless you edit
the default Windows Plug-n-Play path.
162 ImageUltra Builder Version 5.0: User Guide