Lenovo ThinkVantage ImageUltra Builder Version 5.0 User Manual
Page 142
d.
Click OK. The new variable is added to the list of variables.
e.
If you want to prompt the person performing the installation for input,
type the prompt text in the Prompt field. Then, do any of the following:
v
Place a check mark in the Required check box if this input is required.
v
Place a check mark in the Mask Input check box if you want the input
to be hidden as it is typed.
v
Place a check mark in the Encrypt Input check box if you want the
input to be encrypted.
12.
Click the Conditions tab if you want to associate a filter or variable condition
with the menu item.
To associate a filter with a menu item, do the following:
a.
In the Conditions tab, click the Insert Filter icon. The Add Filters window
opens.
b.
If the filter you want to use is in a folder, navigate to that folder.
c.
Select the filter from the repository; then, click OK. The filter is added to
the list.
d.
Double-click the filter you just added. The Edit Parameters window opens.
e.
In the Parameters field, type any required parameters. For information
about the parameters for the filters provided with the ImageUltra Builder
program, see the ImageUltra Builder help system.
f.
Click OK.
g.
Repeat these steps for each filter you want to add.
To associate a variable condition with a menu item, do the following:
a.
In the Conditions tab, click the Insert Variable icon. The Add Variable
Condition window opens.
b.
Use the Variable drop-down menu to select the variable for which you
want to set the condition.
c.
Use the Operator drop-down menu to select either Equals or NOT Equals,
depending on the condition you want to set.
d.
In the Value field, type the value you want to associate with the variable.
e.
Click OK. The variable is added to the list.
If you have multiple filters or variables listed, or any combination of filters
and variables, do one of the following:
v
If you want the menu item to be displayed only if the conditions set by all
filters are met, place a check mark in the All conditions must be satisfied
check box.
v
If you want the menu item displayed if the conditions set by at least one
filter is met, do not place a check mark in the All conditions must be
satisfied
check box.
13.
Click the Exclude tab if you want specific modules to be excluded when this
menu item is selected, then do the following:
a.
In the Exclude tab, click either the Insert Operating System icon, Insert
Application
icon, or Insert Device Driver icon depending on the type of
module you want to exclude. The appropriate Exclude window opens.
b.
If the module you want to exclude in a folder, navigate to that folder.
c.
Click the module you want to exclude, then click OK. The excluded
module is added to the list in the Exclude tab.
d.
Repeat these steps for each module you want to exclude.
128
ImageUltra Builder Version 5.0: User Guide