Lenovo ThinkVantage ImageUltra Builder Version 5.0 - Manual (Page 170)

Setting the attributes for a new add-on operating-system
module
The following information describes how to set the attributes for a new add-on
operating-system module without using an existing module as a template. If you
want to set the attributes for a new module to match the attributes of an existing
module, see “Setting the attributes based on an existing add-on operating-system
module” on page 158.
Note: If you are creating a an UNATTEND.TXT add-on operating-system module
follow the instructions in “Setting the attributes for an UNATTEND.TXT
module” on page 140.
To set the attributes for a new add-on operating-system module, do the following:
1. Open the repository where you want the new add-on operating-system
module to reside.
2. If your repository contains folders, navigate to the folder where you want the
new add-on operating-system module to reside.
3. From the Main Window menu bar, click Insert and then click Operating
System...
. The New Module Wizard opens.
4. Click Next.
5. Verify that the Operating System radio button is selected, and then click Next.
6. In the Name field, type a name that you want to use to identify this module.
Be as specific as possible. This name will be the name that appears in the
repository.
7. Click the No radio button to indicate that this module is not a container.
8. Click Next.
9. Click Next without selecting any of the modules listed.
10. Click the Add on operating system module radio button.
11. Click Next.
12. Click Finish. The New Module Wizard closes and the Operating System
window for the new module opens.
13. In the General tab, do the following:
a.
In the Version field, type the full version of the add-on component.
b. If you want to assign a password to this module, type the encryption key
in the “Encryption key for the password” field.
Note: A password helps prevent the module from being unpacked by any
process other than an ImageUltra Builder process. When you assign
an encryption key, the ImageUltra Builder program assigns a
password to the module. Encryption keys can be up to 64 characters
long using any combination of alpha-numeric characters. Symbols
are not supported.
c. In the Comments field, type any comments you want kept with the
module.
14. In the OS/Languages tab, do the following:
a.
In the left pane, put a check mark next to each language for which the
add-on component will be used. For example, you might choose to use an
English add-on operating-system component with multiple languages, or
you might want to limit its use to English only.
156 ImageUltra Builder Version 5.0: User Guide