Staging-area logic – Lenovo ThinkVantage ImageUltra Builder Version 5.0 User Manual

Page 56

Advertising
background image

Staging-area logic

Because various conditions might exist on different target computers, the
ImageUltra Builder program uses built-in logic to ensure that a common Smart
Image can be used across a wide range of computers. Varying conditions include:

v

Support or the lack of support for an HPA in the BIOS

v

The presence or absence of an HPA

v

The presence or absence of a service partition

The following table shows how the deployment behavior changes on a Lenovo
branded computer based on conditions that exist before the image is deployed.

Notes:

1.

The use of driver maps and the use of device driver modules from either the
service partition or HPA is limited to Portable-Sysprep Images and
Ultra-Portable Images.

2.

You also can use the following table to determine the behavior for a
direct-network install that specifies the use of a service partition for
console-side recovery purposes.

Table 4. Staging-area behavior - Lenovo branded computers

Conditions on a Lenovo branded target computer prior to deployment

Maps deployed

Service partition

present

Description

Result from
deployment

Base map and driver map

Service partition - Front

Yes - Front

v

Create new service
partition at the
front of the hard
disk drive.

v

Move the
necessary modules
from the existing
service partition to
the new partition.

v

Delete the old
service partition.

v

Deploy the image.

v

Delete all
unnecessary
modules and files
from the service
partition. Preserve
any Rapid Restore
files or Rescue and
Recovery files that
might exist.

v

Resize the service
partition, if required.

v

Deploy the Smart
Image as defined by
the base and driver
maps to the service
partition.

Service partition - Front

Yes - Back

Service partition - Back

Yes - Front

Service partition - Back

Yes - Back

Base map and driver map (Front or back)

No

N/A

v

Create the service
partition in the front
or at the back,
depending on the
base map.

v

Deploy the Smart
Image as defined in
the base and driver
maps to the service
partition.

Base map only

42

ImageUltra Builder Version 5.0: User Guide

Advertising