Lenovo IdeaCentre K220 - Manual (Page 25)

22
Hardware Replacement Guide
3. Install the new adapter into the same adapter connector.
4. Ensure the adapter is fully seated into the adapter connector.
5. At the rear of the computer, pivot the adapter latch to the closed position to
secure the adapter.
6. Refer to the “Completing the installation”.
Note: Replacement of some models equipped with graphic
adapter bracket is different.
Please remove the bracket first as the following:
1. Remove the two screws that secure the bracket at the bottom of the chassis.
2. Lift the bracket out of the chassis.
3. Then remove the adapter as above.
31036127 IdeaCentre K_HRG_EN.indd 22 2008.10.20 1:59:38 PM