Lenovo IdeaCentre K220 User Manual
Page 26
Advertising
23
Hardware Replacement Guide
After the Graphic Adapter is installed , install the bracket as the
following:
1. Install the bracket into the chassis so that the screw holes in the bracket align
with those in the chassis. Let the slot on the bracket clip the adapter.
2. Install the two screws to secure the bracket. Note: Use only the screws
provided by Lenovo.
31036127 IdeaCentre K_HRG_EN.indd 23
2008.10.20 1:59:39 PM
Advertising
This manual is related to the following products: