Lenovo C260 Touch All In One User Manual
Page 37
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the rear cover. Refer to "Removing the rear cover".
Step 5.
Remove the 6 screws that secure the hard disk drive to the rear cover.
Step 6.
Disconnect the data and power cable from the hard disk drive.
Step 7.
Lift up the hard disk drive to remove it.
Step 8.
Remove the 4 screws that secure the hard disk drive to the bracket.
Step 9.
To install the new hard disk drive:
a.
Attach the bracket pieces to the new hard disk drive, and secure them with the 4 screws.
b.
Slide the new hard disk drive into the hard disk drive bay.
c.
Secure the new hard disk drive to the rear cover with the 6 screws.
31