Lenovo C260 Touch All In One - Manual (Page 49)

Step 8. Remove the 7 screws that secure the LED panel to the front bezel. The LED panel is glued to the
front bezel, gently remove the LED panel from the front bezel.
Step 9. Remove the 4 screws that secure the LED panel to the bracket to separate the LED panel from
the bracket.
Step 10. To install the new the LED panel:
a. Line up the new LED panel with bracket, and secure it to the bracket with 4 screws.
b. Line up the new LED panel with the front bezel, then place it into position.
c. Secure the LED panel to the front bezel with the 7 screws.
d. Attach all the cables to the new LED panel.
e. Reattach the converter bracket to the front bezel.
f. Reattach the converter board to the bracket.
g. Reconnect the LVDS, converter cables to the new LED panel.
Chapter 7 . Replacing hardware 43