Lenovo C260 Touch All In One - Manual (Page 30)

Replacing the computer stand
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the computer stand:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Use a flat head screw driver to remove the stand cover as shown.
24 Lenovo C260 All-In-One PC Hardware Maintenance Manual