Lenovo C260 Touch All In One - Manual (Page 31)

Step 5. Remove the 2 screws that secure the computer stand to the rear cover.
Step 6. Slide out the computer stand as shown.
Step 7. To install the new computer stand:
a. Line up the computer stand with the mounting hole on the rear cover and slide it into position.
b. Secure the new computer stand to the rear cover with the 2 screws.
c. Reattach the stand cover.
Removing the rear cover
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
Chapter 7 . Replacing hardware 25