Replacing the motherboard – Lenovo C260 Touch All In One User Manual
Page 41
Step 5.
Disconnect the power cable from the connector on the motherboard.
Step 6.
Remove the 2 screws that secure the system fan to the rear cover.
Step 7.
Lift up the system fan to remove it.
Step 8.
To install the new system fan:
a.
Line up the new system fan with the mounting holes on the rear cover and place it into position.
b.
Secure the new system fan to the rear cover with the 2 screws.
c.
Connect the new power cable to the connector on the motherboard.
Step 9.
Reattach the rear cover, stand and stand cover.
Replacing the motherboard
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the rear cover.
To replace the motherboard:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the rear cover. Refer to “Removing the rear cover”.
Step 5.
Remove all memory modules. Refer to “Replacing a memory module”.
Step 6.
Remove the heat-sink. Refer to “Replacing the heat-sink”.
Step 7.
Remove the Wi-Fi card. Refer to “Replacing the Wi-Fi card”.
35