Lenovo IdeaCentre B750 All-in-One - Manual (Page 35)

Step 3. Disconnect the failing power cord and adapter from the computer.
Step 4. Connect the new power cord to the same connector as shown.
Removing the computer cover
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To remove the computer cover:
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4. Remove the 2 cover pieces by sliding them in opposite directions as shown.
Step 5. To reinstall the computer cover:
Chapter 8 . Replacing hardware 29