Lenovo B50-35 All in One - Manual (Page 34)

Step 6. Locate the optical removal notch, and then use a screw driver push the optical drive out.
Step 7. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 8. Remove the 2 screws that secure the optical drive to the metal bracket. 1
Step 9. Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk.
2 3
28 Lenovo B50–35 All-In-One Computer Hardware Maintenance Manual