Lenovo B50-35 All in One User Manual
Page 54
c.
Connect the LVDS cable to the connector on the motherboard.
d.
Connect the touch control board cables to the connector on the touch control board.
e.
Connect the power switch board cable to the connector on the power switch board.
f.
Secure the LED panel to the chassis with the eleven screws.
g.
Attach the camera to the new LED module.
h.
Line up the rear deco with the guide track on the LED module, then slide the rear deco into
position.
i.
Secure the rear deco to the new LED module with the two screws.
j.
Secure the rear deco with the
k.
Line up the chassis and new LED panel with the front bezel, and then place it into position.
l.
Attach the speaker module to the new LED module.
Step 21. Reattach the system fan, EMI cover, middle cover, optical drive, computer stand, foot cover
and stand base.
48
Lenovo B50–35 All-In-One Computer Hardware Maintenance Manual