Lenovo S310 All-in-One - Manual (Page 22)

Using Rescue System
Attention: Using OneKey Recovery will result in loss of data.
Notes:
• You can restore the C: drive of the computer to factory default settings or to the last system backup status
using OneKey Recovery. If you do this, all of the existing data on drive C: will be lost, but the content and
format of the other partitions of the hard disk drive will remain unchanged.
• If you want to install an operating system and back it up with OneKey Recovery, you must format the
C: partition in NTFS format and install the operating system on the C: partition. Otherwise, the OneKey
Recovery system cannot run.
Note about the service partition:
The files and relevant data used by the rescue system are saved in the service partition. Deleting this
partition will make the rescue system unusable. For more detailed information, see the following instructions:
From the Search charm, select Apps ➙ Control Panel ➙ Administrative Tools ➙ Computer Management
➙ Disk Management, you can see the service partition, which must not be deleted.
Note: The recovery files and relevant data used by the rescue system are saved in the service partition. If
the service partition is deleted or damaged by someone other than authorized Lenovo service personnel,
Lenovo will not be liable for any losses arising therefrom in any way.
OneKey Recovery
OneKey Recovery is an easy-to-use application. You can use it to restore your computer to the system
default or to a previously backed up state.
Detailed Operation Procedure:
1. Repeatedly press and release the F2 key once turning on the computer until the Lenovo Rescue
System opens, then select OneKey Recovery.
Note: System Recovery will overwrite all of the data on the C: drive. To prevent loss of data, be sure to
back up relevant data before performing system recovery.
2. Follow the on-screen instructions to select the backup task you want to restore from and the disk where
you want to install the operating system, then press Next to start the restore.
3. Please wait during the process of system recovery. Do not interrupt the operation during the recovery
process.
4. After the system is recovered successfully, the software will prompt you to restart the computer. Restart
the computer and start the operating system.
Driver and Application Installation
The Driver and Application Installation function in the rescue system provides a way for the user to
conveniently reinstall all of the Lenovo applications and drivers that were shipped with your Lenovo hardware.
Method 1: Automatic Installation
Repeatedly press and release the F2 key once turning on the computer until the Lenovo Rescue System
opens, then select Driver and Application Installation. Follow the on-screen prompts to install the Lenovo
drivers and applications. Click OK to start installing the Lenovo Driver and Application Installation software.
The system will restart. After the system has restarted, the drivers and application installation process will
continue until it has completed.
12 Lenovo S310 User Guide