Lenovo IdeaCentre K330B User Manual
Page 28
Advertising
25
Hardware Replacement Guide
7. Use the thermal grease syringe to place five drops of grease on the top of the
microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).
8. Install the new heat sink and fan assembly on the heat sink retention bracket.
9. Reconnect the disconnected cables to the system board.
10. Refer to the “Completing the installation”.
31048526 IC K3 HRG V5.0 (EN)(R).indd 25
2011-3-14 17:34:15
Advertising