Lenovo IdeaCentre Q200 User Manual
Page 14
Advertising
9
User Guide
1. Establishing wireless connection of wireless keyboard
[L-1]
1)
[L-1] Connect the USB interface of the computer: Connect the attached
USB wireless receiver to the USB interface of the computer to receive wireless
signals.
2)
[K-1]
[K-2]
[K-1]
Start the computer and enter the system. Put the battery in the battery compartment
of the keyboard and mouse [K-1], as shown in the figure above.
Note: Check whether the battery of the keyboard and mouse has sufficient
power and is installed correctly, and whether the anode and cathode of the
battery is installed reversely; otherwise the device will not work normally or
will be damaged.
31032755_IdeaCentre Q-UG.indd 9
2007.12.21 2:28:26 PM
Advertising