Lenovo IdeaCentre K220 - Manual (Page 59)

Hardware Maintenance Manual
56
To complete the part installation:
1. Ensure that all components have been reassembled correctly and that
no tools or loose screws are left inside your computer. Refer to “Locating
components” for the location of the various components.
2. Make sure that the cables are routed correctly before replacing the
computer cover.
3. Position the computer cover on the chassis so that the rail guides on
the bottom of the computer cover engage the rails. Then, push the
computer cover closed until it snaps into position.
4. If a cover lock is installed, lock the cover.
5. Reconnect the external cables and power cords into the computer.
Refer to “Locating connectors on the front of the computer” and
“Locating connectors on the rear of the computer”.
6. To update your configuration settings, refer to “Starting the Setup
Utility” in the User Guide or in the Hardware Maintenance Manual.
Note: In most areas of the world, Lenovo requires the return of the
defective CRU. Information about this will come with the CRU or will
come a few days after the CRU arrives.