Lenovo ThinkServer RS140 - Manual (Page 85)

5. Loosen the thumbscrew 1 that secures the slim-optical-drive retainer and then remove the retainer
from the chassis.
Note: The thumbscrew is an integrated part of the slim-optical-drive retainer. Do not try to remove the
thumbscrew from the retainer.
Figure 42. Removing the slim-optical-drive retainer
6. Touch the static-protective package that contains the slim optical drive to any unpainted surface on the
outside of the server. Then, take the slim optical drive out of the package.
7. Slide the slim optical drive into the chassis from the front of the server.
Figure 43. Installing the slim optical drive
Chapter 6 . Installing, removing, or replacing hardware 73