Lenovo IdeaCentre B320 - Manual (Page 20)

15
User Guide
Step 2. Make sure the indicator lights blink and press the Bluetooth
reset button.
When the keyboard and mouse Bluetooth indicator lights blink white, press the
Bluetooth reset button on the back of the computer for over 6 seconds until the
indicator lights of the keyboard and mouse turned off.
Note: If connection is not established successfully, refer to “Wireless
Keyboard and Mouse Connection Instructions and Troubleshooting” in the
User Guide.
Notes:
1) When establishing a wireless connection, it is recommended to keep
the distance from the keyboard/mouse to the computer less than 25 cm
(10 inches)
2) The effective working distance of the wireless keyboard and mouse is 10 m
(33 feet) (depending on the computer’s working environment).
If the wireless device does not work, do the following:
1. Be sure there is no physical obstacle between the wireless device and the
computer.
2. Restart the computer, and verify that the system devices are functional.
3. Repeat the procedure for establishing a Bluetooth connection.
4. Replace the batteries.
5. Do not place the computer under a metal surface or table.
6. Make sure there are no electronic devices close by, such as speakers, remote
controls of electronic toys or mobiles, which might create high electromagnetic
fields that could interrupt the wireless connection.
31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 15 2010-12-24 10:10:43