Lenovo IdeaCentre B320 - Manual (Page 50)

45
User Guide
Method 3: (Using the operating system)
Notes:
• Prepare a wired keyboard and mouse before using this method.
• Follow the steps below to install a new wireless keyboard and mouse.
1. Use a wired keyboard and mouse to start the operating system.
2. Turn on the power switches of the wireless keyboard and mouse (if they have
power ON/OFF switches).
3. Press the Connect buttons on the back of the keyboard and mouse until the
indicator lights blink.
Note: If the wireless indicator lights stop blinking, press the connect
buttons on the keyboard and mouse again.
4. Go to Windows and click Start → Control Panel → Hardware and Sound to
open the Devices and Printers dialog box. Click on Add a device to open a
new dialog box.
5. Select the Lenovo Bluetooth Mouse and click Next to establish the Bluetooth
connection.
6. Select the Lenovo Bluetooth keyboard and click Next. (Click the Add a device
icon if the dialog box has closed, then press the connect button again.)
7. Enter the pairing code and press the Enter key to complete the Bluetooth
connection.
5.8 Troubleshooting wireless mouse and keyboard
issues
Problem: The wireless keyboard or mouse is not paired with your computer.
Troubleshooting and problem resolution:
1. Follow the steps in the “Wireless keyboard and mouse instructions” section in
the User Guide.
2. Check the indicator lights: for more information see the “Indicator light guide”
section. If your wireless keyboard and mouse aren’t paired with your computer,
the indicator lights will start blinking, indicating your keyboard and mouse are in
discovery mode and ready to pair with your computer.
3. Turn the wireless keyboard and mouse off and on again.
a. Reinstall all batteries.
b. Turn on the power switch (if the devices have ON/OFF switches).
c. Repair the devices as explained in the “Wireless keyboard and mouse
31048832 IdeaCentre B3 UG V2.0 (EN)(R).indd 45 2010-12-24 10:10:48