Lenovo IdeaCentre Q200 User Manual
Page 29
Advertising
26
Hardware Replacement Guide
Important
Do not touch the gold contacts on the bottom of the microprocessor.
When handling the microprocessor, touch only the sides.
9. Lift the microprocessor straight up and out of the socket.
Notes
a. Note the orientation of the notches on the microprocessor. This is
important when reinstalling the microprocessor on the new system
board.
b. Do not drop anything onto the microprocessor socket while it is
exposed. The socket pins must be kept as clean as possible.
10. Make sure that the microprocessor retainer is fully open.
11. Holding the microprocessor with your fingers, remove the protective cover
that protects the gold contacts on the new microprocessor .
31032756_HaWaii-HRG_EN.indd 26
2008.1.8 3:31:38 PM
Advertising