AT&T 1412 - Manual (Page 7)

Table/Desk Installation
1 Connect the power cord.
Use only the power cord supplied with this product.
If you need a replacement,call 1 800 222–3111.
2 Connect the telephone line cord(s).
If you have a two-line jack, use only the four-wire (RJ-14) line
cord. Connect the line cord from the wall jack to the jack
labeled
L1/L1+L2 on the base. Make sure the plugs snap firmly
into place.
4
Standard
electrical
outlet
Modular
telephone
jack
L1/L1+L2 Jack
Power
Cord
L1/L2
1412 2002.12.7 9:20 AM Page 4