Agilent Technologies 01664-97005 - Manual (Page 69)

2 Set up the Format menu.
a Press the Format key. Select State Acquisition Mode, then select Full Channel/4K
Memory/50MHz.
b Select the field to the right of each pod field, then select ECL.
3 Set up the Trigger menu.
a Press the Trigger key. Select Clear Trigger, then select All.
b Select the Count Off field, then select Time in the pop-up menu. Select Done to exit
the menu.
c Select the field labeled 1 under the State Sequence Levels. Select the field labeled
"anystate", then select "no state." Select Done to exit the State Sequence Levels menu.
d Select the field next to the pattern recognizer "a," under the label Lab1. Type "000A" ,
then press Select.
Testing Performance
To test the single-clock, multiple-edge, state acquisition
3–47