Autodesk XW8400 User Manual
Page 15
Hardware Configuration Guidelines
9
The Flash® System ROM confirmation menu appears.
9.
Press F10 to confirm.
10.
Press any key.
System ROM Flash was successful appears.
11.
Verify system BIOS settings. See
12.
From the File menu, select Save Changes and Exit.
To update the BIOS on a Linux workstation:
1.
Load the DKU CD in the DVD-ROM drive on the workstation.
2.
Open a terminal.
3.
Type:
cd /mnt/cdrom/Utils/BIOS/
Each supported platform has its own directory that contains an .iso file.
N
OTE
:
For more information about updating the BIOS on your workstation, refer to the
README file located in your platform’s directory.
4.
Type:
cd ./<platform>
5.
Burn the .iso file for your platform onto a CD-ROM and place it in the DVD-ROM drive on
the workstation.
6.
Reboot the workstation and press F10 to enter BIOS.
7.
Select a language.
8.
From the File menu, select Flash System ROM.
The Select a Drive menu appears.
9.
Click Optical Drive.
The Select a Drive confirmation menu appears.
10.
Press F10 to confirm.
11.
Select the 7D5_0115.bin file.
The Flash System ROM confirmation menu appears.
12.
Press F10 to confirm.
13.
Press any key.