Autodesk XW8400 - Manual (Page 50)

Connecting System Components 3
44
Menu Menu Item Comment
ADAT ADAT INs: SRC ON
ADAT INs: SMUX OFF
AES AES IN1+2: SRC OFF
AES IN3+4: SRC OFF
AES IN5+6: SRC OFF
AES IN7+8: SRC OFF
Analog
Analog INs: SoftClip IN1+2: SoftClip ON
IN3+4: SoftClip ON
IN5+6: SoftClip ON
IN7+8: SoftClip ON
Analog
Analog INs: Gain set each input channel to a
value in the range
-95.5 to +31.5 dB
Analog
Analog OUTs: Level set either -10 or +4 for each
output channel
Meter Clip Detect: 3 3 is the recommended setting
Route For analog audio:
AES INs --> ADAT OUTs
Analog INs --> AES OUTs
AES INs --> Analog OUTs If these options do not appear, verify
that Route Unit (in the System,
Miscellany menu) is set to 8.
For digital audio:
AES INs --> ADAT OUTs
AES INs --> AES OUTs
AES INs --> ANALOG OUT
Sync Internal OFF
External AES 1+2 External AES 1+2 is the recommended
setting.
System
Miscellany Route Unit: 8