Autodesk XW8400 - Manual (Page 36)

Connecting System Components 3
30
If you are using only one panel, you can connect that panel directly to the workstation,
instead of using the switch.
3. If you are using more than one panel, use network cables to connect each of the panels to the
network switch.
4. If you are using the panel that includes the tablet, use a USB cable to connect the panel to a
USB port on the back of your workstation.
Autodesk Control Surface
5V DC 4A Ethernet
Autodesk
Tablet
Sy
st
e m
Po
w
e r
Link Activity
- +
To USB extender
HP xw8400 Workstation
To port 1 on USB Extender