AT&T E5900B - Manual (Page 17)

15
Telephone Operation
Handset sounds & alerts
Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
Vibrate (silent call alerting)
When on, the phone vibrates to signal an incoming call
or intercom page. This can be useful in situations where
ring tones are undesirable, or in noisy environments
where ringing may not be heard. Changing the Vibrate
setting does not affect the ringer.
Ringer control
At this menu you can set a default ring volume level (1-
5), or turn the ringer off.
Ringers
This feature allows you to customize the incoming call
alerter. The menu includes options for 8 ringer styles
and 6 musical passages. You will hear an example of
each ringing type as you scroll through the choices.
Low battery tone
The handset is factory programmed to alert you with a
tone when the battery is low and needs recharging. You
can turn this alert on or off at this menu.
Keypad tone
The handset is factory programmed to beep at each
keypress. You can turn the keypad tones on or off at
this menu.
Out-of-range tone
The handset is factory programmed to alert you with a
tone when the handset is too far from the base, to
remind you to move closer. You can turn this alert on
or off at this menu.
Sounds & Alerts 1
Vibrate 1
Select Sounds&Alerts
Options: On/Off
Ringer Control 1
Volume Level: 1 to 5
Ringer: On/Off
Ringers 1
Choose 1 of 14 ringer types
Low Batt Tone 1
Options: On/Off
Keypad Tone 1
Options: On/Off
Range Tone 1
Options: On/Off
ATT-5865CIB-d5.qxd 1/3/2004 11:27 AM Page 15