Message window displays – AT&T E5900B User Manual
Page 44
42
Answering System Operation
Message window displays
The message window usually displays the total number of
memos and incoming messages. See list below for
explanation of other displays in this window.
Message window displays
0
No messages waiting.
1-98
Number of messages/memos, or message
currently playing (see page 40).
10-99
Current Remote Access Code while setting
(see page 39).
1-8
Current volume level while adjusting
1-99 (counting)
Elapsed time while recording a memo (see page 41)
or announcement up to 90 seconds (page 37).
99 (flashing)
Memo recording exceeded maximum time of 99
seconds.
F (flashing)
Memory is full. Messages must be deleted before
new messages can be received.
CL (flashing)
Clock needs to be set (see page 36).
A
Announce Only mode is on (see page 38).
--
System is answering a call, or being accessed
remotely.
-- (flashing)
System is being programmed or initialized.
On (or) OF
Displayed for 1 second when any answering
system setting is turned on or off.
12
Message window
ATT-5865CIB-d5.qxd 1/3/2004 11:33 AM Page 42