AT&T E5900B - Manual (Page 72)

LOW BATTERY
REDIAL CID LOG 2:10 PM
1
2
Battery installation & charging
After installation, place the handset in the charger and allow batteries to charge for 12
hours before use. You can keep batteries charged by returning the handset to the charger
after each use. When battery power is fully depleted, a full recharge takes about 8 hours.
Press coin into slot on
base of handset to
release latch, then
remove battery cover.
Insert supplied
batteries.
Place handset in charger to charge
for 12 hours before first use.
Light remains on while batteries
are charging.
Low battery indicator
Return handset to charger to recharge
when this symbol flashes. (Handset
will beep when battery is low.)
Insert top
tab first.
To replace battery cover
Press down to
click in place.
Plug power cord into jack on underside
of charger, then plug transformer into
electrical outlet.
Caution: Use only the supplied
NiMH battery (80-5461-00-00) or
AT&T model 2AA NiMH replace-
ment battery (SKU 26820). Do not
use alkaline batteries.
ATT-580-2CIB-d2.qxd 1/17/2004 6:07 PM Page 2