Outgoing announcements, To record your outgoing announcement, To delete your outgoing announcement – AT&T E5900B User Manual

Page 39

Advertising
background image

37

Answering System Operation

Outgoing announcements

Outgoing announcements are the messages callers hear
when calls are answered by the answering system.
The phone is pre-programmed with an announcement
that answers calls with “Hello. Please leave a message
after the tone.”
You can use this announcement, or
replace it with a recording of your own voice.

To record your outgoing announcement
Press

MENU

until you hear “Change announcement.”

Then press

RECORD

and begin speaking after you hear

“Now recording.” Speak facing the telephone base from
about 9 inches away.
Elapsed time (in seconds) will be shown in the message
window as you record. You can record an announce-
ment up to 90 seconds long. Announcements less than 3
seconds long will not be recorded.

To delete your outgoing announcement
Press

MENU

until you hear “Change announcement,”

then press

PLAY/STOP

to begin playback. Press

DELETE

during playback to delete your announcement.
When your announcement is deleted, calls will be
answered with the pre-programmed announcement
described above.

1

MENU

“Change
announcement”

2

(Plays announcement
previously recorded)

2

RECORD

“Now recording...”

3

4

(Announcement is
played back)

Speak into microphone

Microphone

Or

12

Elapsed
recording time
(seconds)

Press to stop
recording

(Play/Stop)

(Play/Stop)

ATT-5865CIB-d5.qxd 1/3/2004 11:32 AM Page 37

Advertising
This manual is related to the following products: