Replacing a memory module – Lenovo M4400s notebook User Manual

Page 49

Advertising
background image

6. Remove the hard disk drive by lifting the tab.

5

Figure 16. Removing the hard disk drive

7. Slide a new hard disk drive firmly into place, and then reinstall the screws to secure the drive.

8. Reinstall the bottom slot cover, and then reinstall the screws to secure the cover.

9. Reinstall the battery pack. See “Replacing the battery pack” on page 29.

10. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing a memory module

Before you start, print these instructions.

Note: The operating speed of memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.

Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.

To replace a memory module, do the following:

1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait

three to five minutes to let the computer cool.

2. Close the computer display, and turn the computer over.

3. Remove the battery pack. See “Replacing the battery pack” on page 29.

Chapter 6

.

Replacing hardware

35

Advertising