Konica Minolta bizhub PRESS C8000e - Manual (Page 131)

Chapter 5: Print Operation (XPS) Perfect Binding Function
5-17
1
2
3
4
5
7
9
8
10
6
Print Operation (XPS)
Cover Print 1 in 1
This is used when arrangements are made in advance for the originals the front cover, the
back cover and the spine of which have been cut and pasted to the same size as the paper
used as the front cover.
When printing the both sides of the front cover, it is necessary to make arrangements for the
reverse side of the front cover in advance.
Ex.: Using [Cover Print 1in1] for the perfect binding
• The use of [PI Tray] and [PB Cover Tray] is not available for [Cover Print 1in1].
Cover Print 2 in 1
For the front cover, the first page and the last page (n page) of the originals are made as 2 in
1, and the second page up to the last page but one (n - 1 page) are printed as the body of
documents with no printing made on the spine for perfect binding.
The width you set in the printer driver is reflected to the spine width. The setting can range
between 1 to 30 mm in increments of 0.1 mm.
Ex.: Using [Cover Print 2in1] for the perfect binding
Cover Print 1in1 (Both sides)
5
n-
2
Cover Print 2in1 (Both sides)
n-
2