Konica Minolta bizhub PRESS C8000e - Manual (Page 53)

Chapter 1: Preparation for Use Paper Setting
1-31
1
2
3
4
5
7
9
8
10
6
Preparation for Use
• When performing the Both Sides Adjust, refer to “Overview of Both Sides Adjust” (p. 1-19.)
• For setting operations of the Curl Adjustment, refer to “Setting Curl Adjustment” (p. 1-28.)
• For setting operations of the Air Assist, refer to “ Setting Air Assist” (p. 1-40.)
• The Process Adjustment provides Transfer Offset Adjustment and Pressure Power Set-
ting. For details of the set values, contact your service representative.
• The Color Density Control is available when you set [Yes] for the Use Color Density Con-
trol setting provided for Color Density Control on the Adjustment Menu screen.
5.
Specify paper conditions as desired, and then press [OK].
• When the Paper Profile Name Setting screen is displayed, use the
screen keypad to enter a desired paper profile name, and then press
[OK].
6.
Press [Close].