Konica Minolta bizhub PRESS C8000e User Manual
Page 190
Advertising
Finisher Adjustment
Chapter 9: Troubleshooting
9-12
• Finisher Adjustments for finishing options other than Folding Unit FD-503 can be set by
the similar procedures above mentioned. For details, refer to User’s Guide - Main Body.
4.
Press [01 Paper Width Adjustment].
5.
If necessary, set the values respectively.
6.
Press [Print Mode].
7.
Press [Start].
8.
Until getting the adequate width, repeat above mentioned
steps.
9.
Press [Return] after adjustment.
10.
Press [Exit].
•
The MACHINE screen will be restored.
Advertising