Konica Minolta bizhub PRESS C8000e - Manual (Page 175)

Chapter 8: Application Color Centro (IC-601)
8-25
1
2
3
4
5
7
9
8
10
6
Application
Screen Configuration of Color Centro
This section describes the screen configuration of Color Centro.
• Refer to “User's Guide - Color Centro (IC-601)” for how to operate Color Centro.
Item Explanation
[Calibration] Displays the [Calibration Manager] screen to improve the accuracy and
stability of colored output.
You can create data for adjusting the hue by measuring the output con-
ditions of the machine.
[Tone Curve Adjustment] Displays the [Tone Curve Adjustment] screen to adjust the color tone of
output images.
You can adjust the color tone by editing the output values for CMYK
density input values.
[Spot Color] Displays the [Spot Color] screen to adjust the output color of a spot
color.
You can adjust the hue of a spot color (special color or named color)
with the density of CMYK.
[Alternative Color] Displays the [Alternative Color Management] screen to replace a spe-
cific color with another color.
You can adjust the hue of specific RGB or CMYK color with the density
of CMYK.
[Profile Management] Displays the [Profile Management] screen to manage color conversion
settings.
You can copy, create, edit, import or export profiles.
[Color Default Settings] Displays the [Color Default Settings] screen to specify default values in
color conversion settings of the image controller.
You can check and change the default values in the color settings.
[Color Configuration Management] Displays the [Color Configuration Management] screen to manage vari-
ous settings for colored output as a set.
You can create and edit color configurations and profile sets.
Status Bar The IP address and port number of the image controller that you are
connected to is displayed.