Konica Minolta bizhub PRESS C8000e - Manual (Page 182)

Clearing Mishandled Paper Chapter 9: Troubleshooting
9-4
Clearing Mishandled Paper
When a paper misfeed occurs, the machine stops making copies and the Jam Position Screen
displays to indicate misfeed area(s).
The [Start] LED turns orange on the control panel, and copying operation cannot be continued
until all the misfeed locations are cleared.
All the misfeed locations will be indicated by flashing/lighting numbers and arrows on this screen.
Flashing number and arrow indicate the jammed position of the highest priority.
Action to remove mishandled paper is displayed in the message area. Follow the procedure to
remove mishandled paper. After removing the misfeed, returns to the MACHINE screen.
• When removing mishandled paper, be sure to leave no torn paper inside the
machine.
• Do not touch or damage the drum surface.
Caution
• Precaution for high temperature
• The internal fixing unit is very hot.
• To avoid getting burned, DO NOT TOUCH.
• Be especially careful not to put your hand into the fixing unit area when with-
drawing the fixing conveyance unit to remove mishandled paper.
Caution
• Removing Stuck Staples
• Staples are very sharp.
• Be careful of removing staples stuck inside the machine so as not to get injured.
Caution
• Precaution for high temperature
• The internal glue tank unit is very hot.
• To avoid getting burned, DO NOT TOUCH.
• Be especially careful when pushing back in the glue tank unit which has moved
and halted in the front side due to the machine trouble. Do not hold the front side
but the far right side in order to return the glue tank unit to its original position.
For details, see the label applied on the machine.