Konica Minolta bizhub PRESS C8000e - Manual (Page 48)

Paper Setting Chapter 1: Preparation for Use
1-26
• You can also make this adjustment from the Both Sides Adjust screen displayed by
pressing [Both Sides] on the MACHINE screen. In this case, press a tray key located
under [Tray Setting] to select the tray to be adjusted.
• The Chart Adjustment cannot be registered in a paper profile on the Utility Menu screen.
Both Sides Adjust: Making Zoom/Image Shift Adjustment
Make fine adjustment that cannot be made by the Chart Adjustment. This is also used when
numerical data of misalignment between front and back sides is known.
• Performing the Chart Adjustment after the Zoom/Image Shift Adjustment may
require readjustment of the Zoom/Image Shift Adjustment.
1.
Display the Change Individual Set screen by referring to “To
display the Paper Setting screen and the Change Individual
Set screen.” p. 1-16
2.
Press [Both Sides Adj.].
3.
Press [Front] or [Back] to select the print side to be
adjusted.
[Next Page]