Perfect binding, Prefect binding setting, Perfect binding -9 – Konica Minolta bizhub PRESS C8000e User Manual
Page 75: Prefect binding setting -9, Refer to p. 2-9
Advertising
1
2
4
5
7
9
8
10
6
Chapter 2: Copy Operation
Perfect Binding
2-9
Copy Operation
Perfect Binding
Prefect Binding Setting
• It is recommended to turn on the heater of Perfect Binder PB-503 at least 20 min-
utes before use, since it requires approximately 20 minutes for warming up.
• As a trial, to output one copy and confirm the width of spine to specify is recom-
mended.
1.
Place the paper (Body Set/Cover) on the tray.
2.
Select the tray loaded with paper for body sets, and change
the paper setting as required.
3.
Press [Output Setting] - [Perfect Bind].
4.
Press [Change Set] for Cover Tray and select the tray
loaded with covers.
[Next Page]
Advertising